NEWLEAD WIRE AND CABLE MAKING EQUIPMENTS GROUP CO.,LTD
Newlead Wire And Cable Making Equipments Group Co.,Ltd More than 30 years of top-quality technology for the wire and cable industry.
Add to Cart
Elongation and tensile strength tester for Vertical Enameling Machine GB/T4074.3-2008/IEC60851-3
Performance Characteristics of Product
Executive standard: GB/T4074.3-2008/IEC60851-3; Inspection standard: JB/T4279.3-2008
Applicable to metal wires with pulling strength ≤3000N;
Test process would be automatically completed and, after user inputting wire size of samples to be measured, the instrument would automatically calculate tensile strength;
Application of matured advanced human-computer interface would provide a hint for test operating procedure and display test results of elongation, pulling strength and tensile strength;
Two test modes are available: Micro-fine wire and medium & large wire;
50N-3000N sensors can be switched over arbitrarily;
Automatic outrange protection for instrument;
The application of software facilitates instrument’s on-line operation and control as well as data analysis and comparison, and allows for display of stress-strain curve chart of 15 samples in different colors;
Automatically calculate the average of each test result of less than fifteen samples;
Number and save test results and corresponding curves automatically in chronological order;
Report of test results can be generated and printed out;
Instrument is provided with sensor self-calibration function and equipped with standard weight for calibration;
Servo motor and high precision ball screw is used;
Clamps are designed on the basis of characteristics of wires and can be conveniently loaded and unloaded with samples;
All test data can be automatically transmitted to upper computer, and be saved and analyzed by DMS-15 quality inspection data management system for enameled winding wire.
Major Technical Parameters
| Start distance between two clamps | (200mm or 250mm) ±0.5mm two modes adjustable |
| Displacement distance of movable clamp | ≥80(≥160mm or 200mm) |
| Stretching speed of sample | 50~400mm/min adjustable |
| Error between displayed and actual elongation value | <1; |
| Dynamometry accuracy | Within ±0.2% of indicating value |
| Test force resolution | 0.10N |
| Input power | AC220V±10% 50Hz |
| Consumed power | ≤400W |
| Overall dimensions | L×W×H 600×400×1050mm |
| Weight | 75kg |
Standard configuration:
Microwire:
One 50N and 500N sensor for each;
One 20N standard weight;
One SC-5E software CD;
Medium and large wires:
One 500N and 3000N sensor for each;
One SC-5E software CD;
Sensors available: 100N, 200N, 1000N and 2000N
Optional Model: SC-5D elongation and tensile strength tester (desktop)
